top of page

Search

Search this site

33 results found with an empty search

  • Blue Sun Scientific | NIR Analyzers for Food & Agriculture

    Phoenix NIR analyzers for forage, feed, pet food, oilseed, rendering, dairy and seed breeding. Fast, reagent-free analysis. Designed and built in the USA. Phoenix NIR Analyzers for Agriculture and Food Our Phoenix NIR solutions cater to the agricultural and food industries, offering rapid and non-destructive analysis for forage, animal feed, pet food, oilseeds, plant breeding, and more. We understand the unique challenges of these sectors and are committed to supporting our customers with expert knowledge and trusted support. Talk to a Specialist or call (410) 705-2279 Replaces wet-chemistry methods One scan, many parameters Results in seconds, not hours No reagents, minimal prep Scanning Monochromator High resolution across the whole NIR range Optional Autosampler Run samples unattended NIR built for how you work Every analyzer runs on the same Phoenix platform — choose the path that matches your operation. Animal Nutrition Rapid NIR analysis for forage, feed, rendering, and pet food — lab-grade accuracy from raw ingredient to finished product. Explore Animal Nutrition → Wheat Milling Protein, moisture, and ash from incoming wheat to finished flour — whole grain and flour analysis on a single instrument. Explore Wheat Milling → Oilseed Accurate oil, protein, and moisture analysis on seed and meal — NIR built for crushers, processors, and seed breeders. Explore Oilseed → Dairy Fat, moisture, protein, and salt in cheese, butter, whey, and powders — fast results that keep standardization and yield on target. Explore Dairy → University & Research One flexible platform for research and teaching labs — measure virtually any sample type and develop your own calibrations. Explore Research → Snack Food Oil, moisture, and seasoning on chips and extruded snacks — accuracy that controls fryer performance and seasoning consistency Explore Snack Food → READY WHEN YOU ARE See how the Phoenix fits your operation Tell us your samples and throughput and we'll match you to the right configuration — with a hands-on evaluation on your own material. Talk to a Specialist Browse the Analyzers

  • About | Blue Sun Scientific

    Learn how Blue Sun Scientific develops and manufactures cutting-edge NIR analyzers and instruments. Based in Jessup, MD, we provide high-quality laboratory and in-process analytical solutions for the agriculture, food, and chemical industries. About Blue Sun Scientific Blue Sun Scientific designs and manufactures near-infrared (NIR) analyzers for the food and agriculture industries. Our Phoenix analyzers give labs, producers, and researchers fast, reagent-free, non-destructive analysis — results in about 30 seconds — so they can make confident decisions about quality, formulation, and consistency. Every Phoenix is built, calibrated, and supported from our headquarters in Jessup, Maryland, USA, and backed by a technical team that averages more than 10 years of hands-on NIR experience. Our instruments are at work in laboratories across the globe, and we're a proud vendor partner of the NIRS Forage and Feed Testing Consortium. We've been engineering NIR solutions since 1996 — and we still support every instrument we've ever built. Our customers range from on-farm operations and commercial testing labs to global food and feed producers, seed breeders, and university research programs. Wherever fast, accurate composition data matters, the Phoenix fits. Why customers choose Blue Sun Scientific Built in the USA Every Phoenix is designed, assembled, and shipped from our Maryland facility — and supported by the same people who build it. Real NIR Expertise Our technical managers average 10+ years of hands-on NIR experience, so when you need help, it comes from people who genuinely know the technology. Long Term Support We still service every instrument we've made. Your Phoenix is an investment we keep working for years, not a unit we sell and move on from. Flexibility that Fits You Use a calibration partner's database, bring the calibrations you've already built, or develop your own — the Phoenix adapts to how your lab already works. Whether you're analyzing forage, feed, grain, oilseeds, dairy, or an application we haven't listed yet, we'll help you find the right fit. [See our analyzers →] [Contact us →]

  • Phoenix 6000 Side Loader NIR Analyzer | 600–2500 nm | Blue Sun

    Extended-range NIR analyzer (600–2500 nm) with dual detectors and optional 30- or 50-cup autosampler for high-throughput, unattended testing. Made in USA. Phoenix 6000 Side Loader NIR Analyzer The Phoenix NIR Analyzer is an ideal solution for manufacturers and laboratories that require rapid, accurate and reliable NIR analysis. The Phoenix Sideloader is compatible with an optional autosampler for laboratories that require the highest throughput and most reliable NIR analysis. Download Brochure Request Information 600-2500nm Extended NIR Wavelength Range The expanded wavelength range of 600 to 2500 nm in NIR analysis captures a richer dataset, making it ideal for researchers and specialized applications that benefit from the extended range, such as chlorophyll analysis in canola. This extended range enables a thorough, representative scan that supports diverse and detailed analyses, particularly beneficial in agricultural and food products where composition and uniformity can vary significantly. The expanded capability is perfect for advanced applications, helping researchers obtain precise and meaningful data across a wide range of samples . Autosampler Option The Phoenix 5000 Sideloader can supplemented with an optional autosampler for high-throughput-automated analysis. The autosampler is compatible with industry standard ring cups. making it an ideal solution for forage laboratories, seed breeders, and commercial laboratories. There are two autosampler models for either 30 sample or 50 sample capacities. The autosampler solution is fully automated, allowing operators to program entire runs and walk away while the Phoenix Sideloader with Autosampler analyzes the entire run unattended. Designed for Ease of Use Extended Wavelength Range 600-2500 nm wavelength range is optimal for researchers and select applications. Side Loader Design Compatible with standard ring cups, the Phoenix Sideloader is idea for ground, homogeneous samples and seeds. Innovative Sample Handling The Phoenix 5000 Top Window's innovative sample car allows for a variety of sample cups to analyze both ground and unground as well as liquid samples. Easy Operation To analyze a sample, fill the sample cup, place it on the instrument, and press the on-screen scan button. Analysis will begin immediately and results will be displayed in approximately 30 seconds. Expert Support Blue Sun Scientific technology managers have on average 10+ years of NIR experience in a variety of NIR technologies and applications Intuitive Software The Phoenix software's four tab design utilizes color coded buttons and tabs to allow operators to learn and use the instrument easily. Flexible Data Handling Operators can easily export results to Excel, LIMS, or modbus. Historical results can quickly be viewed in the BlueScan sofrware. High Performance NIR The Phoenix 6000 delivers exceptional reliability, precision and accuracy by utilizing a scanning monochromator, the most trusted NIR technology for producing consistent results. Made in USA Each Phoenix 6000 is built and shipped from our company's headquarters in Maryland, USA. Application Support The Phoenix 5000 Top Window is well suited for a variety of applications. Select an application below for more information. Canola Feed Olive Oil Rendering Spices Chocolate Flour Petfood Snack food Tobacco Dairy Forage Potato Soybean University Want to Know More? Please take a moment to tell us more about your application and a Blue Sun Scientific NIR specialist will promptly be in contact to discuss your application and answer all of your questions. First name* Last name* Company name* Email* Phone* Describe your Application* Connect with an NIR Specialist

  • Forage NIR Analyzer for Hay & Silage | Phoenix 5000 | Blue Sun

    30 second analysis of forages including alfalfa, hay, haylage, corn silage and more. Optional autosampler for high throughput laboratories. Phoenix 5000 NIR Forage Analyzer The Phoenix 5000 NIR forage analyzer delivers lab-grade results on alfalfa, corn silage, hay, haylage, and more in about 30 seconds per sample. A single scan returns dry matter, protein, ADF, NDF, fiber digestibility, and more — with no reagents and no destruction of the sample. Designed, built, and supported from our headquarters in Maryland, USA. Download Brochure Request More Info Two Configurations, One Platform The Phoenix 5000 forage analyzer comes in two configurations built around how your lab works. Both deliver 30-second analysis with the same accuracy — the difference is throughput and sample handling. For high-throughput labs Phoenix Sideloader Designed for labs running thousands of samples a year. Load the autosampler, walk away, and let it run unattended. Optional 30 or 50-cup autosampler Unattended, continuous operation Uses ISI ring cups (ground, homogeneous samples) Request a Consultation For sample flexibility Phoenix Top Window Designed for nutritionists, universities, and labs that analyze a range of sample types. Multiple cup types in one instrument Scans 99% of the sample area for lower sampling error Integrated check standard with drift prevention Request a Consultation Sideloader and Top Window Features Feature Sideloader Top Window Autosampler Yes (30 or 50 cup) No Sample Cups Ring cups only Large, ring, transflectance Sample Types Ground, homogeneous Ground, wet, unground Operation Unattended batches Attended, one at a time Best Fit Highest throughput Maximum flexibility Flexible Calibration Options An NIR analyzer is only as good as its calibration. The Phoenix gives you three ways to get there — including keeping the calibrations you've already built on another platform. Use a calibration partner Start with the same forage calibrations North America's leading forage labs rely on. A reliable forage calibration takes thousands of samples with matching wet chemistry results, collected across crops, regions and growing seasons. Few labs have that data when they bring in a new instrument, so most license calibrations from a provider that does. Five of North America's major forage calibration providers license their calibrations for use on the Phoenix, and each of them runs Phoenix analyzers in its own affiliate labs. When you license a calibration from one of these partners, you're using the same models on the same instrument platform their own labs use every day. Calibration partners Cumberland Valley Analytical Services (CVAS) Dairy One Dairyland Laboratories NIRS Consortium (NIRSC) Rock River Laboratory Bring your legacy database Already invested years building calibrations on another NIR platform? Keep them. The Phoenix is custom-built for transferability — its configurable wavelength intervals can be matched to your existing instrument, and our transfer algorithms align spectra while compensating for instrument, math-treatment, and wavelength-scale differences. In many cases, no new samples required. Build your own Develop and fully own your calibrations with the Alligator Calibrator chemometrics software. Traditional, trusted chemometric workflows, multi-constituent calibration, and complete control of your data — with no subscription, no hidden costs, and no internet connection required. See the Phoenix in Action Play Video Facebook Twitter Pinterest Tumblr Copy Link Link Copied Phoenix Sideloader with Autosampler Play Video Facebook Twitter Pinterest Tumblr Copy Link Link Copied Phoenix Top Window Phoenix 5000: Designed for Ease of Use Easy Operation Fill the cup, set it on the instrument, and scan — results in about 30 seconds. Flexible Data Handling Export results to Excel, LIMS, or Modbus, and review history anytime in BlueScan. Expert Support Our technology managers average 10+ years of hands-on NIR experience. High Performance NIR A scanning monochromator— a trusted NIR technology for reliable, precise, consistent results. Intuitive Software A simple four-tab, color-coded interface that operators learn and use with ease. Made in USA Every Phoenix 5000 is built and shipped from our headquarters in Maryland, USA. Trusted by Leading Forage Labs Since employing the Phoenix, it has far outshined what initially drew us to it. It's become the central workhorse of our laboratory network — South America, Europe, and the U.S. Don Meyer President, Rock River Laboratory It now takes one technician to run an instrument where it used to take two. Each instrument we add eliminates one FTE — a huge win for us. Phillip Goldblatt NIR Programs Manager, Dairyland Laboratories Our staff and students enjoy the software for its ease of use. The Blue Sun team strives to make the experience easier than anyone else in the business. David McIntosh Coordinator III, UT Beef & Forage Center CUSTOMER STORY Real-time feeding decisions at Wolf Creek Dairy "On-farm analysis allows us to know exactly what we are feeding the cows." — Rochelle Schroeder, DVM, Wolf Creek Dairy When forage results came back from an outside lab three to four days later, Wolf Creek Dairy was fine-tuning rations on data that was already stale. By bringing a Phoenix 5000 in-house, their team now analyzes forages in real time — right before they go into the total mixed ration — keeping the herd's diet consistent as they work through each pile. Read more: Enhancing Dairy Operations with On-Site NIR Analysis at Wolf Creek Dairy Want to Know More? Please take a moment to tell us more about your application and a Blue Sun Scientific NIR specialist will promptly be in contact to discuss your application and answer all of your questions. First name* Last name* Company name* Email* Phone* Describe your Application* Connect with an NIR Specialist

  • Soybean Analyzer | NIR Analyzer

    Phoenix 5000 NIR analyzer for the rapid analysis of soybean and soybean products. Phoenix 5000 NIR Soybean Analyzer Rapid NIR Analysis for moisture, fat, protein, fiber, starch, & FFA Control moisture and quality for incoming soybeans Optimize the the extraction process Analyze soymeal for residual oil Determine the quality of oil (FFA & peroxide value) Download Brochure Request Information Phoenix 5000 NIR for Soybean Processing The Phoenix 5000 NIR analyzer brings precision and efficiency to soybean crushers, enabling fast, at-line and laboratory analysis of whole seed, hills, meals, and finished product—all on the same instrument. The Phoenix 5000 provides fast, simultaneous measurements of key quality attributes, such as moisture, fat, protein, fiber, starch & FFA, giving soybean processors essential data to maintain product consistency and produce a high quality finished product while minimizing waste. With the Phoenix 5000, soybean crushers can optimize processes in areas like: Receiving Monitor quality of incoming soybean Production Control 30 second analysis of in-process product Rapid decision making Final Product Specification Confirm quality of finished product Label deck Reduce laboratory costs Get to Know the Phoenix 5000 Phoenix 5000: Designed for Ease of Use Easy Operation To analyze a sample, fill the sample cup, place it on the instrument, and press the on-screen scan button. Analysis will begin immediately and results will be displayed in approximately 30 seconds. Expert Support Blue Sun Scientific technology managers have on average 10+ years of NIR experience in a variety of NIR technologies and applications Intuitive Software The Phoenix software's four tab design utilizes color coded buttons and tabs to allow operators to learn and use the instrument easily. Flexible Data Handling Operators can easily export results to Excel, LIMS, or modbus. Historical results can quickly be viewed in the BlueScan sofrware. High Performance NIR The Phoenix 5000 delivers exceptional reliability, precision and accuracy by utilizing a scanning monochromator, the most trusted NIR technology for producing consistent results. Made in USA Each Phoenix 5000 is built and shipped from our company's headquarters in Maryland, USA. Want to Know More? Please take a moment to tell us more about your application and a Blue Sun Scientific NIR specialist will promptly be in contact to discuss your application and answer all of your questions. First name* Last name* Company name* Email* Phone* Describe your Application* Connect with an NIR Specialist

  • Olive Analyzer | NIR Analyzer

    Test pastes, pomace and oil for moisture, oil and FFA. Optimize extraction and reduce waste with the Phoenix 5000 Olive Analyzer. Phoenix 5000 NIR Olive Analyzer Rapid NIR Analysis for moisture, oil, & ffa. Determine payment for incoming paste quality Monitor moisture and oil in pomace Optimize extraction and minimize waste Confirm quality of finished product Download Brochure Request Information Phoenix 5000 NIR for Olive Oil production The Phoenix 5000 NIR analyzer brings precision and efficiency to olive oil production, enabling fast, at-line and laboratory analysis of pastes, pomaces, and oils—all on the same instrument. The Phoenix 5000 provides fast, simultaneous measurements of key quality attributes, such as moisture, oil content & ffa, giving olive oil producers essential data to maintain product consistency, optimize extraction, and minimize waste. With the Phoenix 5000, olive oil producers can optimize processes in areas like: Receiving Monitor quality of incoming paste Production Control 30 second analysis of in-process product Rapid decision making Extraction Monitor moisture & oil in pomace Final Product Specification Confirm quality of finished product Label deck Reduce laboratory costs Get to Know the Phoenix 5000 Phoenix 5000: Designed for Ease of Use Easy Operation To analyze a sample, fill the sample cup, place it on the instrument, and press the on-screen scan button. Analysis will begin immediately and results will be displayed in approximately 30 seconds. Expert Support Blue Sun Scientific technology managers have on average 10+ years of NIR experience in a variety of NIR technologies and applications Intuitive Software The Phoenix software's four tab design utilizes color coded buttons and tabs to allow operators to learn and use the instrument easily. Flexible Data Handling Operators can easily export results to Excel, LIMS, or modbus. Historical results can quickly be viewed in the BlueScan sofrware. High Performance NIR The Phoenix 5000 delivers exceptional reliability, precision and accuracy by utilizing a scanning monochromator, the most trusted NIR technology for producing consistent results. Made in USA Each Phoenix 5000 is built and shipped from our company's headquarters in Maryland, USA. Want to Know More? Please take a moment to tell us more about your application and a Blue Sun Scientific NIR specialist will promptly be in contact to discuss your application and answer all of your questions. First name* Last name* Company name* Email* Phone* Describe your Application* Connect with an NIR Specialist

  • NIR for Oilseed Processing | Phoenix Analyzers | Blue Sun

    Near-infrared (NIR) analysis for the oilseed industry: moisture, oil, protein, fiber, and chlorophyll across whole seed, press cake, meal, and finished oil NIR Designed for Oilseed Processing & Breeding Whole seed, flakes, press cake, meal, pomace, crude oil and by-products — the Phoenix NIR analyzer measures every stream in your process on one instrument, in about 30 seconds. Request Information Explore the Analyzers One NIR instrument for every stream in the plant Most oilseed operations end up with separate methods for seed, for meal and for oil. The Phoenix Top Window takes all three on the same instrument — you change the cup, not the analyzer. Three cup types cover everything from unground whole seed to finished oil. That matters beyond the equipment list. When incoming seed, press cake and finished oil are all read on one instrument, the numbers sit on a common basis — the residual oil at the press is directly comparable to the oil you graded on the way in, instead of two methods you have to reconcile. And because the Phoenix is fully sealed to IP62, the same analyzer works in the QA lab or out at the press, so lab and at-line results don't drift apart. Three cup types, for every product you measure Large Cup Solids, ground and unground Ring Cup Ground samples and seed Transflectance Cup Liquids Explore the Oilseed Analyzer → Load up to fifty samples, walk away, get the seed back intact Breeding programs are throughput problems. The Phoenix Sideloader with Autosampler runs batches of 30–50 unattended — or continuously, as you keep adding cups — and the analysis is non-destructive, so every seed you screen is still available to plant. Identity travels with the cup, not the worklist Automating sample handling usually just relocates the clerical work: the cup is anonymous, its identity comes from its slot in the rack, and an operator maintains a worklist to match them up. One cup in the wrong position and every result after it attaches to the wrong seed line. The RFID tag system removes that failure mode — the sample ID and product code are written to the cup's own tag, and the Phoenix reads them back at the moment of the scan so you can load the rack in any order. Explore the Canola Analyzer → Measured head-to-head on soybean meal — and it led the field A prospective buyer designed and ran the test: the Phoenix against three competing NIR and FT-NIR analyzers on soybean-meal protein. All four ran the same 21 samples, each on its own native commercial calibration, against an independent validation set held out from calibration. How the evaluation was run The customer designed and ran the evaluation — not the vendor Same 21 soybean-meal samples, protein 44.4–47.6% Each analyzer on its own native commercial calibration Results compared against the reference laboratory, with no bias or slope adjustment applied The Result The Phoenix had the lowest prediction error of the four analyzers: an SEP of 0.28% protein (R² 0.86), compared with 0.57, 0.65 and 0.90% (R² 0.52, 0.27 and 0.15) for the three competing NIR and FT-NIR analyzers. Explore the Soybean Analyzer → Screening thousands of seed lines without spending the seed Pennycress is being bred from a common weed into an aviation-fuel crop — a winter cover crop whose oil suits renewable diesel and jet fuel. Reaching that point meant characterizing thousands of genetic lines for oil, moisture and protein. The Phoenix NIR analyzer is what made screening at that volume possible. The seed is worth more than the measurement Early-generation breeding material exists in quantities too small to spend on a wet-chemistry test — consume the sample to measure it and the line is gone. Spectral data collected across thousands of seed samples was used to build calibration models predicting oil content, moisture and protein composition, and because the measurement is non-destructive, the same seed continued straight into the next generation. That changed what the program could evaluate. Analysis time and cost dropped enough to support genuinely high-throughput selection — which is the constraint that decides how quickly a new crop reaches commercial scale. Read "Breeding a Better Biofuel" THIS IS NIR DESIGNED FOR OILSEED ANALYSIS See how the Phoenix fits your plant or breeding program Tell us your samples and throughput, and we'll match you to the right configuration and calibrations — with a hands-on evaluation on your own material. First name* Last name* Company name* Email* Phone* Describe your Application* Connect with an NIR Specialist

  • Spice Analyzer | NIR Analyzer

    Rapidly analyze spices and blends for moisture, volatile oil, ash and more. Phoenix 5000 NIR Spice Analyzer Rapid NIR Analysis for moisture, oil, ash, piperine, and sugar Monitor quality of incoming raw materials Optimize blending to ensure consistent VO levels Confirm moisture, oil and VO for consistent finished product Download Brochure Request Information Phoenix 5000 NIR for Spice Millers and Producers The Phoenix 5000 NIR analyzer brings precision and efficiency to spice processors, enabling fast, at-line and laboratory analysis of raw materials, in-process, and finished product—all on the same instrument. The Phoenix 5000 provides fast, simultaneous measurements of key quality attributes, such as moisture, oil, ash, piperine, and sugar, giving spice producers essential data to maintain consistency and produce a high quality finished product. With the Phoenix 5000, spice millers and processors can optimize production in areas like: Receiving Monitor quality of incoming raw materials Production Control 30 second analysis of in-process product Rapid decision making Final Product Specification Confirm quality of finished products Label deck Reduce laboratory costs Get to Know the Phoenix 5000 Phoenix 5000: Designed for Ease of Use Easy Operation To analyze a sample, fill the sample cup, place it on the instrument, and press the on-screen scan button. Analysis will begin immediately and results will be displayed in approximately 30 seconds. Expert Support Blue Sun Scientific technology managers have on average 10+ years of NIR experience in a variety of NIR technologies and applications Intuitive Software The Phoenix software's four tab design utilizes color coded buttons and tabs to allow operators to learn and use the instrument easily. Flexible Data Handling Operators can easily export results to Excel, LIMS, or modbus. Historical results can quickly be viewed in the BlueScan sofrware. High Performance NIR The Phoenix 5000 delivers exceptional reliability, precision and accuracy by utilizing a scanning monochromator, the most trusted NIR technology for producing consistent results. Made in USA Each Phoenix 5000 is built and shipped from our company's headquarters in Maryland, USA. Want to Know More? Please take a moment to tell us more about your application and a Blue Sun Scientific NIR specialist will promptly be in contact to discuss your application and answer all of your questions. First name* Last name* Company name* Email* Phone* Describe your Application* Connect with an NIR Specialist

  • Canola Analyzer | NIR Analyzer

    Optimize in-process moisture, fat, protein, fiber & FFA levels of canola and canola products and confirm the quality of whole seed and finished product. Phoenix 6000 NIR Canola Analyzer 30 Second Analysis for moisture, fat, protein, fiber, FFA, and chlorophyll. The Phoenix 6000 Canola (Rapeseed) Analyzer offers canola processors and seed breeders fast, at-line and lab analysis to optimize production, minimize costs and ensure a consistent product. Control moisture and quality for incoming canola. Optimize the pressing and extraction process Analyze canola meal for residual oil Determine the quality of oil (FFA & peroxide value) Download Brochure Request More Info Phoenix 6000 NIR for Canola/Rapeseed The Phoenix 6000 NIR analyzer simplifies the analysis of canola/rapeseed. Whole seed, flakes, press cake, meal, and oil can all be analyzed on the same instrument. NIR analysis offers rapid analysis of multiple parameters simultaneously, providing canola crushers and seed breeders important insight and data for identifying favorable genetics and optimizing extraction. The Phoenix 6000 can help canola crushers optimize production in multiple ways including: Seed Breeding Automate NIR analysis for high throughput Ingredients Monitor quality of incoming whole seed Production Control Optimize extaction of meals and cakes Tighten upper and lower control limits Final Product Specification Label deck Confirm oil quality Reduce laboratory costs Phoenix Sideloader with Autosampler For high throughput analysis, the Phoenix 5000 can be configured as a side loading instrument with a 30 or 50 cup autosampler. Minimize operator time Automate analysis Streamline operations Integrated RFID reader/writer Cumberland Valley Analytical Services Dairy One Dairyland Laboratories, Inc. NIRS Consortium Rock River Laborartory, Inc. Play Video Facebook Twitter Pinterest Tumblr Copy Link Link Copied Phoenix Top Window For standard forage analysis, the Phoenix 5000 can be configured as a top window instrument. Total sample scan Flexible sampling options Integrated check standard Play Video Facebook Twitter Pinterest Tumblr Copy Link Link Copied Phoenix 6000: Designed for Ease of Use Easy Operation To analyze a sample, fill the sample cup, place it on the instrument, and press the on-screen scan button. Analysis will begin immediately and results will be displayed in approximately 30 seconds. Expert Support Blue Sun Scientific technology managers have on average 10+ years of NIR experience in a variety of NIR technologies and applications Intuitive Software The Phoenix software's four tab design utilizes color coded buttons and tabs to allow operators to learn and use the instrument easily. Flexible Data Handling Operators can easily export results to Excel, LIMS, or modbus. Historical results can quickly be viewed in the BlueScan sofrware. High Performance NIR The Phoenix 5000 delivers exceptional reliability, precision and accuracy by utilizing a scanning monochromator, the most trusted NIR technology for producing consistent results. Made in USA Each Phoenix 6000 is built and shipped from our company's headquarters in Maryland, USA. Want to Know More? Please take a moment to tell us more about your application and a Blue Sun Scientific NIR specialist will promptly be in contact to discuss your application and answer all of your questions. First name* Last name* Company name* Email* Phone* Describe your Application* Connect with an NIR Specialist

  • Potato Analyzer | NIR Analyzer

    NIR analyzer to test moisture, oil and FFA to for potatoes and potato products to minimize costs and produce a consistent product. Phoenix 5000 NIR Potato Analyzer Rapid NIR Analysis for moisture, oil, & FFA. Monitor moisture and quality of incoming potatoes Control moisture throughout production Determine fat and oil throughout production and in coatings Confirm oil quality Download Brochure Request Information Phoenix 5000 NIR for Potato Processing The Phoenix 5000 NIR analyzer brings precision and efficiency to potato processors, enabling fast, at-line and laboratory analysis of raw, in-process, and finished product—all on the same instrument. The Phoenix 5000 provides fast, simultaneous measurements of key quality attributes, such as moisture, oil content & FFA, giving potato processors essential data to maintain product consistency and high quality finished product. With the Phoenix 5000, potato processors can optimize processes in areas like: Receiving Monitor quality of incoming potatoes Production Control 30 second analysis of in-process product Rapid decision making Final Product Specification Confirm quality of finished product Label deck Reduce laboratory costs Get to Know the Phoenix 5000 Phoenix 5000: Designed for Ease of Use Easy Operation To analyze a sample, fill the sample cup, place it on the instrument, and press the on-screen scan button. Analysis will begin immediately and results will be displayed in approximately 30 seconds. Expert Support Blue Sun Scientific technology managers have on average 10+ years of NIR experience in a variety of NIR technologies and applications Intuitive Software The Phoenix software's four tab design utilizes color coded buttons and tabs to allow operators to learn and use the instrument easily. Flexible Data Handling Operators can easily export results to Excel, LIMS, or modbus. Historical results can quickly be viewed in the BlueScan sofrware. High Performance NIR The Phoenix 5000 delivers exceptional reliability, precision and accuracy by utilizing a scanning monochromator, the most trusted NIR technology for producing consistent results. Made in USA Each Phoenix 5000 is built and shipped from our company's headquarters in Maryland, USA. Want to Know More? Please take a moment to tell us more about your application and a Blue Sun Scientific NIR specialist will promptly be in contact to discuss your application and answer all of your questions. First name* Last name* Company name* Email* Phone* Describe your Application* Connect with an NIR Specialist

  • Industries | Blue Sun Scientific

    Blue Sun Scientific provides analytical solutions for many agricultural, food and environmental industries. Can We Help You Find an Industry Solution? Dairy & Meat Dairy Meat & Rendering Packaged Food Breakfast Cereal Chocolate Potato Snack Food Plant & Leaf Products Spices Tobacco Feed & Forage Animal Feed Forage Petfood Grains & Oilseeds Flour Milling Canola (Rapeseed) Olive Oil Soybean University & Research Animal Science Food Science Don't See Your Industry? If you would like to learn more about custom application development: Contact Us

  • Phoenix 5000 Side Loader NIR Analyzer | Autosampler | Blue Sun

    High-throughput NIR analyzer (1100–2500 nm) with optional 30- or 50-cup autosampler for unattended forage, feed and pet food testing. Made in USA. Phoenix 5000 Side Loader NIR Analyzer The Phoenix NIR Analyzer is an ideal solution for manufacturers and laboratories that require rapid, accurate and reliable NIR analysis. The Phoenix Sideloader is compatible with an optional autosampler for laboratories that require the highest throughput and most reliable NIR analysis. Download Brochure Request Information 1100-2500nm Standard NIR Wavelength Range The comprehensive wavelength range in NIR analysis, specifically from 1100 to 2500 nm, provides a rich dataset that is ideal for agricultural and food analysis due to its ability to capture critical absorption bands associated with essential components like moisture, protein, fat, fiber, and starch. This wavelength range allows for a thorough and representative scan, essential in agricultural and food products where uniformity and composition can vary significantly. Autosampler Option The Phoenix 5000 Sideloader can supplemented with an optional autosampler for high-throughput-automated analysis. The autosampler is compatible with industry standard ring cups. making it an ideal solution for forage laboratories, seed breeders, and commercial laboratories. There are two autosampler models for either 30 sample or 50 sample capacities. The autosampler solution is fully automated, allowing operators to program entire runs and walk away while the Phoenix Sideloader with Autosampler analyzes the entire run unattended. Designed for Ease of Use Standard Wavelength Range 1100-2500 nm wavelength range is optimal for most food and agricultural applications. Side Loader Design Compatible with standard ring cups, the Phoenix Sideloader is idea for ground, homogeneous samples and seeds. Innovative Sample Handling The Phoenix 5000 Top Window's innovative sample car allows for a variety of sample cups to analyze both ground and unground as well as liquid samples. Easy Operation To analyze a sample, fill the sample cup, place it on the instrument, and press the on-screen scan button. Analysis will begin immediately and results will be displayed in approximately 30 seconds. Expert Support Blue Sun Scientific technology managers have on average 10+ years of NIR experience in a variety of NIR technologies and applications Intuitive Software The Phoenix software's four tab design utilizes color coded buttons and tabs to allow operators to learn and use the instrument easily. Flexible Data Handling Operators can easily export results to Excel, LIMS, or modbus. Historical results can quickly be viewed in the BlueScan sofrware. High Performance NIR The Phoenix 5000 delivers exceptional reliability, precision and accuracy by utilizing a scanning monochromator, the most trusted NIR technology for producing consistent results. Made in USA Each Phoenix 5000 is built and shipped from our company's headquarters in Maryland, USA. Application Support The Phoenix 5000 Top Window is well suited for a variety of applications. Select an application below for more information. Canola Feed Olive Oil Rendering Spices Chocolate Flour Petfood Snack food Tobacco Dairy Forage Potato Soybean University Want to Know More? Please take a moment to tell us more about your application and a Blue Sun Scientific NIR specialist will promptly be in contact to discuss your application and answer all of your questions. First name* Last name* Company name* Email* Phone* Describe your Application* Connect with an NIR Specialist

  • Oilseed Analyzer | NIR Analyzer

    Analyze oilseeds quickly and easily for a variety of critical parameters - important to oilseed crushers and seed breeders. Phoenix 5000 NIR Oilseed Analyzer Rapid NIR Analysis for moisture, protein, fat, fiber, ash, oleic acid, linoleic acid and more. Analyze oilseeds such as canola/rapeseed, soybean, olive oil, and more. Optimize the extraction process by analyzing pressed cake and meals Determine oil quality by analyzing for free fatty acids and peroxide value. Download Brochure Request Information Phoenix 5000 NIR for Oilseed Analysis The Phoenix Top Window by Blue Sun Scientific is an ideal solution for oilseed processors and crushers that are seeking to optimize yields and produce a consistent, high-quality oil. The Phoenix Top Window’s sampling system allows it to analyze whole seeds, flakes, press cake, oilseed meals, oil, and by-products. Multiple parameters can be measured simultaneously including moisture, protein, fat, fiber, ash, oleic acid, and linoleic acid as well as chlorophyll in rapeseed/canola. The Phoenix 5000 can help oilseed crushers optimize production in multiple ways including: Raw Material Grading Monitor quality of incoming oilseeds Process Control Analyze residual oil in pressed cake Rapid decision making Oil Quality Determine oil quality by analyzing free fatty acids, acid value, iodine value, and peroxide value By-products Measure moisture, protein, oil, fiber and ash in pressed cakes and meals Maximize profits on by-products Get to Know the Phoenix 5000 Phoenix 5000: Designed for Ease of Use Easy Operation To analyze a sample, fill the sample cup, place it on the instrument, and press the on-screen scan button. Analysis will begin immediately and results will be displayed in approximately 30 seconds. Expert Support Blue Sun Scientific technology managers have on average 10+ years of NIR experience in a variety of NIR technologies and applications Intuitive Software The Phoenix software's four tab design utilizes color coded buttons and tabs to allow operators to learn and use the instrument easily. Flexible Data Handling Operators can easily export results to Excel, LIMS, or modbus. Historical results can quickly be viewed in the BlueScan sofrware. High Performance NIR The Phoenix 5000 delivers exceptional reliability, precision and accuracy by utilizing a scanning monochromator, the most trusted NIR technology for producing consistent results. Made in USA Each Phoenix 5000 is built and shipped from our company's headquarters in Maryland, USA. Want to Know More? Please take a moment to tell us more about your application and a Blue Sun Scientific NIR specialist will promptly be in contact to discuss your application and answer all of your questions. First name* Last name* Email* Phone Company Application* Submit

  • Animal Feed NIR Analyzer | Phoenix 5000 | Blue Sun

    Analyze protein, moisture, fat, fiber, starch and ash in animal feed in ~30 seconds with the Phoenix 5000 NIR analyzer. Made in USA. Request a quote. Phoenix 5000 NIR Feed Analyzer Get lab-quality feed analysis in seconds. The Phoenix 5000 animal feed NIR analyzer reads moisture, protein, fat, fiber, starch, and ash from a single scan — reagent-free and non-destructive — so feed producers can verify quality, formulate at lower cost, and meet label specs without the wait. Designed, built, and supported in the USA. Download Brochure Request Information Get to Know the Phoenix 5000 Feed Analyzer In this 3-minute video, see how the Phoenix 5000 NIR feed analyzer helps feed mills cut over-formulation: lab-quality moisture, protein, fat, fiber, starch and ash results in about 30 seconds, on everything from raw grains to finished pellets. What the Phoenix NIR 5000 Measures Moisture controls quality of incoming materials and prevents over/under-drying Protein hits formulation targets and label claims Fat monitors energy content and tracks fat in extruders and dryers Fiber assesses quality and digestibility Starch supports diet formulation and energy calculations Ash Indicates mineral content and contamination Feed Types Poultry Feed Check protein, moisture, and fat in poultry rations to keep formulations on target and minimize costs. Swine Feed Confirm nutrient levels across swine diets, from incoming materials to finished feed, keeping rations on spec. Cattle & Dairy Feed Analyze moisture, protein, and fiber in cattle and dairy rations to support consistent diets and efficient performance. Aquafeed Measure protein, fat, and moisture in aquafeed to hold tight nutritional specs for efficient, consistent nutrition. How Feed Mills Use NIR Analysis The Phoenix 5000 NIR analyzer simplifies the analysis of feed and feed ingredients by allowing multiple ingredients and finished products to be analyzed on the same instrument. NIR analysis offers rapid analysis of multiple parameters simultaneously, providing feed producers important insight and data for formulating diets for livestock, as well as in quality control and product development. The Phoenix 5000 can help feed millers optimize production in multiple ways including: Ingredients Monitor quality of incoming ingredients Confirm product quality for formulation Production Control Meet protein target Tighten upper and lower control limits Least Cost Formulation Bin bottom analysis Rapid decision making Finished Product Label deck Reduce laboratory costs NIR vs. Wet Chemistry: Why Feed Mills Choose NIR Wet chemistry is the accuracy benchmark — but it's slow, reagent-heavy, and costly per sample. NIR delivers results correlated to those same reference methods in seconds, so you can test far more often without the wait, the chemicals, or the lab bill. NIR Wet Chemistry Speed ~ 30 seconds Hours to days Reagents None Chemical reagents required Sample Non-destructive Sample consumed Parameters per run Several at once One assay at a time Cost per test Very low Higher (reagents + labor) Where you run it On-site, in-process Usually in a lab Wet chemistry remains the reference standard that NIR calibrations are built on — so NIR is your fast, everyday tool, with wet chemistry as the benchmark behind it. Read more: [NIR vs. Wet Chemistry for Feed Analysis] CUSTOMER STORY "On-farm analysis allows us to know exactly what we are feeding the cows." — Rochelle Schroeder, DVM, Wolf Creek Dairy Real-time feeding decisions at Wolf Creek Dairy When forage results came back from an outside lab three to four days later, Wolf Creek Dairy was fine-tuning rations on data that was already stale. By bringing a Phoenix 5000 in-house, their team now analyzes forages in real time — right before they go into the total mixed ration — keeping the herd's diet consistent as they work through each pile. Read more: [Enhancing Dairy Operations with On-Site NIR Analysis at Wolf Creek Dairy] Phoenix 5000: Designed for Ease of Use Easy Operation Fill the cup, set it on the instrument, and scan — results in about 30 seconds. Flexible Data Handling Export results to Excel, LIMS, or Modbus, and review history anytime in BlueScan. Expert Support Our technology managers average 10+ years of hands-on NIR experience. High Performance NIR A scanning monochromator— a trusted NIR technology for reliable, precise, consistent results. Intuitive Software A simple four-tab, color-coded interface that operators learn and use with ease. Made in USA Every Phoenix 5000 is built and shipped from our headquarters in Maryland, USA. Phoenix 5000 Specifications TECHNOLOGY & PERFORMANCE NIR Technology Scanning Monochromator Detector High-performance InGaAs Wavelength Range 1100-2500 nm Spectral Resolution 0.5, 1.0, 2.0 nm (selectable) Measurement Mode Reflectance or transflectance Analysis Time 10 - 60 seconds (~30 seconds typical) Wavelength Accuracy <0.05 nm matched to an internal reference standard Drift Control Internal Drift Prevention with embedded standards SAMPLE HANDLING Sample Cups Large, small, custom Sample Prep Little to none DATA & SOFTWARE Software BlueScan Data Export Excel, LIMS, Modbus Operating System Windows 10/11 Need the complete datasheet? The brochure has full dimensions, power and environmental specs, as well as the Phoenix 5000 vs. 6000 comparison.[Download the Phoenix brochure (PDF)] Want to Know More? Please take a moment to tell us more about your application and a Blue Sun Scientific NIR specialist will promptly be in contact to discuss your application and answer all of your questions. First name* Last name* Company name* Email* Phone* Describe your Application* Connect with an NIR Specialist

bottom of page