Block digestor with procedures for
Kjeldahl Nitrogen and Total Phosphorus
The Smart Digest block digestor is available in 20 and 40 tube versions.
The Smart Digest is a microprocessor-controlled smart module, for acid digesttion of food products and water samples.
It has been designed to speed up the preparation process for samples to be analysed by conventional chemistry or using our CFA analysers or discrete analysers.
With this module, we also provide digestion procedures for Kjeldahl Nitrogen and total Phosphorus.
The smart controller provides user-friendly operation and indicates the different stages of the process via its numeric keypad and LED display.
40 or 20 positions available
Continuous heater elements for improved temperature uniformity
Corrosion resistant design
Glassware with Accessories
75 mL tubes for 40-position Smart Digest
100 mL tubes for 40-position Smart Digest
250 mL tubes for 20 position Smart Digest
Solid State Controller
Visual display of digestion status
Automatic safety shutoff
Operation - Temperature
Control Range and Resolution
Ambient to 400° C in 1° C increments
Accuracy +/- 2°C in control range
Amplitude (at setpoint): less than +/- 1°C
Ramp Rate: 4°C - 7°C per minute
Operating Voltage: 208-240 VAC. 50/60 Hz
Current: 12 amps @ 220 VAC.
(2) 15 amp, 250 V fuses
(1) 2 amp, 250 V fuse
Heating unit: 66 lbs
Control unit: 5 lbs
Tubes: 6.5 lbs/set
Stand 4 lbs
Heating unit: 8.5" x 13.5" x 20" (H x W x D)
Control unit: 6.75" x 7" x 10" (L x W x D)
Stand with handles: 6" x 12" x 11" (H x W x D)