FlowSys

Flowsys_all.jpg

Continuous Flow Analyzer

The FlowSys, continuous flow analyzer, automates environmental testing to free up operator time and ensure best lab practices.

  • Up to 90 analyses per hour

  • Fully automated - Simply program your worklist and walk away.

  • Export Results to Excel, LIMS or shared drive

  • Easy to use - No scientific background required

Easy Operation

Daily operation of the FlowSys is simple. Worklists can be programmed in under 5 minutes.

 

Simply enter your sample information and select which chemistries you would like applied to each. Press play and the FlowSys will run unattended.

 

The graphical interface will let you observe the reaction dynamics in real time.

3channelgraphics.jpg
UNADJUSTEDNONRAW_thumb_137.jpg
High Throughput

The FlowSys can be configured with a 104 or 200 position autosampler.

This high sample capacity and high-throughput make it an ideal solution for labs with large testing volumes.

Multiple Channel Configuration

 

Operators the are testing for multiple parameters can configure the FlowSys with multiple manifolds dedicated to a variety of parameters.

This design optimizes throughput and allows for flexibility in testing options.

UNADJUSTEDNONRAW_thumb_154.jpg
In-line Sample Preparation

FlowSys manifolds can be configured to automate sample preparation including, digestions and distillations making it an ideal solutions for:

  • TKN

  • Ammonia

  • Phenols

  • Cyanide

Calibration Curves

 

Calibrations curves can be generated from a prepared standard. The FlowSys can auto-dilute based on a preprogrammed concentration to ensure your ​results.

 

All calibration information is automatically saved for traceability and can be exported into reports for auditing purposes.

UNADJUSTEDNONRAW_thumb_58.jpg
Stand Alone Operation

 

Every FlowSys channel comes standard with integrated software and a touch screen.

 

This allows channels to operate without an external PC. The operator is guided through a simplified menu to the calibration procedure and the sample analysis. 

EPA seal.png
Preprogrammed Methods

 

The EasyChem 200 is preprogammed with EPA approved methods for a variety of sample types including wastewater, fresh water, seawater, brackish water, soils, and plant tissues.

A listing of the most common parameters can be found below.

104 or 200 position autosamplers available

Color touch-screen

PC controlled Wash/Reagent valves

Random access autosampler

Auto-diluter option

1.0 mm I.D. reaction line

Low reagents consumption & low cost for reagents disposal

Special pump design/new manifold connectors

Explore the FlowSys

flowsys_modulo_e_display.jpg

Surface, Ground, Drinking, Waste & Seawater

Aldehydes

Alkalinity

Aluminum

Calcium

Chorides

Chlorine

Chromium 6

COD

Cyanide Free + Total

Fluoride

Hardness

Iron

Manganese

Nitrate + Nitrite

Nitrite

Permanganate Index

Phenols

Phosphate

Silicate

Sulfate

Sulfide

Total Nitrogen

Total Phosphorous

Soils, Plants, Feeds and Fertilizers

Ammonia

Calcium

Chloride

Magnesium

Nitrate + Nitrite

Nitrite

Phosphate

Potassium (Flame)

Sodium (Flame)

Silicates

Sulfate

Total Nitrogen (TKN)

Total Phosphorous