top of page

SeaWater Analysis with the EasyChem Plus


The EasyChem Plus with extended 50 mm flow cell combines the benefits of discrete analyzers with the sensitivity needed for seawater analysis.


It has a 60 sample capacity and can perform up to 60 tests per hour.


Each sample can be tested for for multiple parameters and results can be exported to Excel, LIMS or to a shared drive.

No scientific background is required. The software is easy to use. Worklists can be created quickly and easily. Once the instrument has been programmed, the operator is free to attend to other duties around the lab.

Every EasyChem Plus comes preprogrammed with standard EPA and ISO methods for seawater.

Low Level Ranges
EasyChem Plus Screenshot.png


Daily operation of the EasyChem Plus is simple. Worklists can be programmed in under 5 minutes. Simply enter your sample information and select which chemistries you would like performed. Press play and the EasyChem Plus will run unattended for up to 98 tests.

Easychem Cal curve and Results.jpg


Calibrations curves can be generated from a prepared standard. The EasyChem Plus can auto-dilute based on a preprogrammed concentration to ensure your ​results. All calibration information is automatically saved for traceability and can be exported into reports for auditing purposes.

easychem plus 5.jpg


The EasyChem Plus has up to 18 reagent positions. The reagent tray is refrigerated to extend the life of the reagents. Each tests uses microliters of reagents which can be a large cost savings over traditional flow instruments or manual testing.

Additional Resources

bottom of page